Public Release 7.26.21

Major VersionM

by Eric Sutter

01 – Verifying All Parts are in Your Order

Written By: Eric Sutter
  • Comments: 0
  • Favorites: 0

Difficulty

Moderate

Steps

2

Time Required

Suggest a time??

Sections

1

Flags

0

    • A. One printer unit

    • B. 4 rolls of black mark Direct Thermal labels (Two 4x6 and Two 4x2)

    • C. One installation guide

    • D. One extra battery

    • E. One charging cable

    • F. One belt clip

  2. Open the rubber cover on the right side of the printer. Connect the charging cable to power, and then plug it into the DC port of the right. The power indicator LED should show an amber color while charging. Once fully charged, the LED will turn off.

    • Open the rubber cover on the right side of the printer.

    • Connect the charging cable to power, and then plug it into the DC port of the right.

    • The power indicator LED should show an amber color while charging. Once fully charged, the LED will turn off.

Finish Line

Author

Eric Sutter

Member since: 05/22/2018

239 Guides authored

Team

Global Shop Employees Member of Global Shop Employees

1 Member

239 Guides authored

0 Comments

Add Comment