Public Release 12.31.21

Major VersionM

by Eric Sutter

02 - Adding a Power Strip to the Cart

Written By: Eric Sutter
  • Comments: 0
  • Favorites: 0

Difficulty

Moderate

Steps

2

Time Required

Suggest a time??

Sections

1

Flags

0

  1. Identify bolt holes for power strip on the back of the cart. Insert the screws through the power strip and cord wrap.

    • Identify bolt holes for power strip on the back of the cart.

    • Insert the screws through the power strip and cord wrap.

  2. Tighten the wing nut around the bolt from inside the cart. While holding the wing nut, use a screw driver to tighten the screw to further secure the power strip. Wrap the power cord around the bracket.

    • Tighten the wing nut around the bolt from inside the cart.

    • While holding the wing nut, use a screw driver to tighten the screw to further secure the power strip.

    • Wrap the power cord around the bracket.

    • The power strip is now complete!

Finish Line

Author

Eric Sutter

Member since: 05/22/2018

239 Guides authored

Team

Global Shop Employees Member of Global Shop Employees

1 Member

239 Guides authored

0 Comments

Add Comment