-
-
Place the printer on a flat, stable surface.
-
Take the plastic film off of the printer, and get the cables out of their packaging.
-
-
-
USB-C
-
USB-A
-
The USB-B and USB-A are two ends of the same cable. The USB-C to USB-A cable is only used for initial set-up and support. It should NOT be used for other purposes.
-
Power Outlet Plug
-
Printer Power Plug
-
The Power Outlet Plug and the Printer Power Plug are two ends of the same cable.
-
-
-
Plug the USB-C into the printer's USB interface behind the Interface Cover.
-
Plug the USB-A into your computer/laptop's USB port.
-
To correctly identify the USB-C from the USB-A, please refer to the last step.
-
-
-
Connect the Printer Power Cord into the back of the printer in the power cord socket.
-
Once the Printer Power Cord is connected, connect the Power Outlet Cord into a power outlet.
-
DO NOT turn the printer on without the labels being loaded first. See how to load Direct Thermal labels HERE
-
Team
