Public Release 12.31.21

Major VersionM

by Eric Sutter

06 - Connecting Barcode Scanner

Written By: Eric Sutter
  • Comments: 0
  • Favorites: 0

Difficulty

Moderate

Steps

3

Time Required

Suggest a time??

Sections

1

Flags

0

  1. A. USB Adapter Cable

    • A. USB Adapter Cable

    • B. Base

    • C. Neck

    • D. Scanner

  2. Remove the wingnut from the neck. Insert the bottom of the neck through the base. Screw the wingnut back onto the bolt of the neck on the other side of the base.

    • Remove the wingnut from the neck.

    • Insert the bottom of the neck through the base.

    • Screw the wingnut back onto the bolt of the neck on the other side of the base.

    • The neck can be adjusted to hold the barcode scanner in any way you would like.

  3. Insert one end of the USB adapter into the barcode scanner. Plug the USB end of the USB adapter into the Mini PC Plug the USB end of the USB adapter into the Mini PC

    • Insert one end of the USB adapter into the barcode scanner.

    • Plug the USB end of the USB adapter into the Mini PC

Finish Line

Author

Eric Sutter

Member since: 05/22/2018

239 Guides authored

Team

Global Shop Employees Member of Global Shop Employees

1 Member

239 Guides authored

0 Comments

Add Comment