Number Update 7.26.21

Minor Versionm

by Eric Sutter

07 - Calibration

Written By: Eric Sutter
  • Comments: 0
  • Favorites: 0

Difficulty

Moderate

Steps

2

Time Required

Suggest a time??

Sections

1

Flags

0

  1. Turn on the printer by pressing and holding the power button until the LED screen lights up and the printer beeps. Select the 'Menu' button to the left of the panel Press the 'Down' arrow and select 'Sensor.'

    • Turn on the printer by pressing and holding the power button until the LED screen lights up and the printer beeps.

    • Select the 'Menu' button to the left of the panel

    • Press the 'Down' arrow and select 'Sensor.'

  2. Select the first option, 'Auto Calibration.' Press the 'Down' arrow once then select 'Black Mark.' The printer should begin calibration. It will print a few blank labels as part of this process

    • Select the first option, 'Auto Calibration.'

    • Press the 'Down' arrow once then select 'Black Mark.'

    • The printer should begin calibration. It will print a few blank labels as part of this process

Finish Line

Author

Eric Sutter

Member since: 05/22/2018

239 Guides authored

Team

Global Shop Employees Member of Global Shop Employees

1 Member

239 Guides authored

0 Comments

Add Comment