Introduction
How to attach the belt clip to your GSS Mobile label printer.
-
-
Before beginning, make sure the printer is turned off (the screen and indicator LED should be unlit).
-
Turn the print over. Use one finger to push the latch inward until the battery unseats, then pull it up and out.
-
-
-
Insert the rounded knob on the clip into the groove.
-
Pull the clip forward and down, so that the clip is out of the way of the battery slot.
-
-
-
Place the battery back in it's slot, putting in the end without the latch first, then press down firmly on the left side until the latch clicks into place.
-
The belt clip should now be held firmly into place.
-
Almost done!
Finish Line
Team
